Low-Field Pulsed Pump Paper Pulp Pump With Labyrinth Seal For Paper
Pulp
Product instruction:
Refer to the foreign advanced technology, we research and develop
the Single-stage Single-suction centrifugal paper pulp pump with
cantilever type. And the gap between front and back wear-resisting
plates can be adjusted. The capacity and head are stable. Under the
same conditions, the cost of our pump operation is lower.
Features:
Reduce the pressure of shaft seal to reduce the leak to a minimum.
Main components adopt paraffin wax precision casting, so the
product inside is sleek. And the impeller will do G6.3 balance
calibration.
Totally open wide flow impeller makes pump no-blocking and
transporting thicker slurry. Axial force is low, and complete pump
has no vibration. The weight of impeller is lighter than closed or
semi-open impeller. When starting the pump, the radial shear stress
of shaft is lower, which makes each part long service life and low
repair rate.
Use coupling. Under the circumstance of not disassembling the
pump’s import and export, impeller, back wear-resisting plate and
bearing bracket can be disassembled and assembled.
Thicken treatment in the pump body which is easy to be damaged.
Thicken treatment in the impeller blades and back wear-resisting
plate which is easy to be damaged. It can improve the service life.
Many different kinds of shaft seal can be chosen.
The range of Parameter:
Capacity: 20-2300m3/h
Head: 8-60m
Plasma concentration: ≤5%
Working temperature: ≤100C
Special requirements can be given according to the special
requirements.
