With Wide Range Motor Power Centrifugal Water Pump Middle Open Pump

Description:

The shaft sealing package is made up of oil-filled asbestos packing, gland, seal cage and stuffing box on the pump casing. Its function is to prevent air from getting into the pump and too more water from coming out of the pump along the shaft.

The shaft sleeve is used to prevent the shaft from rubbing with the packing stuff. The sleeve should be replaced in time when it wears out.

Feature:

1. The elastic coupler and motor is connected to drive. The revolving of pump is clockwise when being viewed from the end of driving.

2. The pump applies to the area of 50HZ or 60HZ power source.

3. The series of single-stage centrifugal pump casing and cover make up of the operating room of pump. The impeller, shaft and ball bearing make up of the rotor parts of pump. The hanger supports the rotor parts of pump.

4. The axial and radial force of pump is borne by the ball bearing. The axial sealing of pump is made up of packing gland, packing and packing ring (mechanical sealing also can be used),which to avoid gas to enter and greatly leak.
5. The shaft sleeve is installed on the position of packing to protect the shaft to avoid the wear of shaft. Sealing ring is installed between the shaft and sleeve to avoid gas to enter and leak along the surface of shaft.
6. The front and back of impeller mostly has sealing ring to balance the axial force, and there is balancing hole on the back cover plate of impeller. If the axial force is not too big, there no sealing ring and balancing hole on the back of impeller.

Application:

Paragon Industrial Corporation is established in 2007, which is located in Hangzhou, Zhejiang China. It is an enterprise consist of paragon industrial Corp., Hangzhou JoHo Imp &Exp Co.Ltd ,Hangzhou Zhenxing pumps factory and Hangzhou Sixin pumps manufactory. The company is mainly engaged in developing and producing non clog centrifugal pump, paper and pulp pumps, refiner, agitator, vacuum pump, chemical pump and so on.

Our pumps are the revised model of Anderitz, So they are good at efficiency, energy-saving, low noise and environmental protection, They are exported to Southeast Asia, like Indonesia and Singapore for more than 8 years.

Our target markets are paper and pulp making industry and chemical processing industrial . Paragon has experienced engineers who can provide the users optimal solutions based on the practical situation.

We also provide Clients with many services, such as complete equipments , installing, maintenance and mountings. We guarantee the Clients with competitive products, timely delivery and satisfied service.