Centrifugal Non-Clog Horizontal Chemical Process Pump With Wear
Materials
Description:
Chemical process pump, it is widely used in the field of chemical
engineering, petroleum, metallurgy paper-making, food, medicine,
fiber, etc., it is suitable for delivery corrosive medium or the
medium which are not permitted to contaminate, the inlet pressure
is ≤0.3MPa, the medium temperature is 20°C to 105°C, it can deliver
more higher temperature medium by cooling unit.
Structure:
The pump is single-stage single-suction overhanging centrifugal
pump. The pump is back pull-out type. It is unnecessary to disturb
the inlet piping, outlet piping and pump casing, the impeller can
be dismantled for maintenance.
The shaft seal adopts packing seal or mechanical seal according to
customers ‘requirements. The pump uses rolling bearings which get
lubricated with dilute oil.
Feature:
1. Improve the stability of measurement: separate pressure
fluctuation from die head and upstream, fall the tolerance of
product’s measurement to smallest.
2. Reduce raw material consumption: the size of the extruded
production have minimum changing, reducing scrap and the rejection
rates.
3. Reasonable operation: pressure closed-loop control, PLC and
intelligent instruments.
4. Prolong the service life: reducing the extrude pressure and
working intensity, put off the abrasion of screw and screw
cylinder.
Application:
This pump is widely used in chemical, pharmaceutical, oil,
metallurgical, power, electroplating, pickling, pesticide,
papermaking and other industry liquid transportation, wastewater
treatment and adds acid process. Conveying any concentration
sulfuric acid, hydrochloric acid, nitric acid, acetic acid,
hydrofluoric acid, aqua regia, strong alkali, strong oxidizer,
organic solvent and other strong corrosive medium application, is
one of the most advanced anti-corrosion equipments.
